Err

Shop
Search Your Cart
WARRANTY REPAIRSAt FISCO we of course look after and warranty any product purchased from ourselves but we can also look after products which are purchased else where as long as we are a main dealer or agent for the manufacturer. When the machine is brought to ourselves we need a proof of purchase and the appropriate estimate fee will be charge to the customer. As long as the warranty is approved by the manufacturer this will be refunded. 
GENERAL REPAIRSBe it a small repair to a recoil, a fuel system clean out or a complete engine replacement our trained technicians are more than up to the task of repairing your machinery. Trained by the biggest manufacturers they do all repairs in house to the manufacturers specifications. No job is too small and we deal with most of the major manufacturers for parts keeping the cost to a minimum.
All repairs incur an estimate fee now payable upfront. The charge will be between £10-£30 dependent on the product. Please contact our sales desk for more information.
ISEKI TXG24 SUB COMPACT TRACTOR
Power Engine: Type Diesel indirect injection, overhead valve
Displacement 1123cc
No of cylinders 3
Power 16.8kW (23hp) at 2600rpm
Fuel capacity 25ltr
Rated engine speed 2600rpm
Transmission Type Hydrostatic
Gear forward/reverse 2/2
Speed 0 to 14.3km/h (8.8mph)
Driven Wheels 4WD
Differential Lock Standard
Brakes Type Wet discs
Tyres Type Turf or Semi-Ag or Ind
Front 18 x 8.50-10
Rear 26 x 12.0-12
PTO Engagement Hydraulic
Rear PTO at engine rpm 540 @ 2532rpm
Mid PTO at engine rpm 2000 @ 2476rpm
Hydraulics Steering Hydrostatic (power)
Main System Transmission mounted gear pup with flow divider
Max output 24 ltr/min (5.1gal/min) @ 2500rpm
Three point lift Category 1
Lift Capacity 540kg (1190lb) at ball end
ROPS Type Rear foldable
Dimensions Length 2.58m
Width 1.22m
Height with ROPS 2.352m (1.61m folded)
Weight with ROPS 690kg
Ground Clearance 215mm (8.4)
Optional Equipment 550 litre low dump collector with 540rpm blower and collector frame available
MX Loader plus a range of buckets, grabs and forks.
Mid-mount decks - rear or side discharge

ISEKI SXG216 + COMMERCIAL LAWN TRACTOR
Power Engine: Type Diesel, indirect injection, overhead valve
Displacement 688cc
No of cylinders 2
Power 10kW (13.5hp) at 2800rpm
Fuel capacity 18ltr (3.95 gal)
Transmission Type HST (Hydrostatic transmission) 2WD
Rear axle Straight axle
Brakes Type Wet single disc
No. of brakes 1 (before diff)
Tyres Front 16 x 6.50-8
Rear 20 x 18.00-10
Dimensions Length 1.77m (70)
Width 0.99m (38.98)
Overall height 1.27m (50)
Weight Deck: 344 kg (757 lbs) Link: 3kg (6.6 lbs)
Mower Deck SCMA40 No of blades: 2
Centre rear discharge rotary, synchronised blades
Cutting width 1.01m (40)
Cutting height 30mm (1.18 ) - 120mm (4.72)
Adjustments 7 stage via clevis pin and stepless by dial
Weight 55kg (121 lbs)
Collector (SBC402X) Capacity 320 ltr
Type Blowerless, centre collection, low dump
Dump system Hydraulic
Weight 50kg (110.2 lbs)
Dimensions (with SCMA40 and Hydraulic Collector SBC400XLAE)
Height (top of seat) 1.27m (50)
Height (Collector) 1.19m (46.9)
Width 1.07m (42.1)
Length 2.5m (98.4)
Wheelbase 1.22m (48.03)
Total weight 452kg (994 lbs)
ISEKI SXG323+ COMMERCIAL LAWN TRACTOR
Power Engine: Type Water-cooled, 4-cycle, diesel, indirect injection
Displacement 1123cc
No of cylinders 3
Power 14kW (19 hp) at 2600rpm
Fuel capacity 21ltr (4.6 gal)
Transmission Type HST (Hydrostatic transmission)
Rear axle Chain drive to each wheel
Brakes Type Dry, internal expanding shoe
No. of brakes 1 before diff (garden version) 2 after diff (homologated road legal version)
Tyres Front 16 x 8.50-8
Rear 23 x 10.50-12
Dimensions Length 2140mm (84.3)
Width 1110mm (43.3)
Overall height 2140mm (84) or 1830mm (72) with ROPS folded
Weight 515kg (1135lbs) Garden model or 520kg (1146 lbs) Homologated model
Mower Deck SCMA 54 No of blades: 2
Centre rear discharge rotary, synchronised blades
Cutting width 1220mm (48)
Cutting height 25mm (1.0) - 115mm (4.5) by pin or 25mm (1.0) - 90mm (3.5) by dial
Adjustments 7 stages by pin replacement and stepless dial
Weight Deck 97kg (214lbs), link 8kg (18lbs)
Collector (optional) SBC600 X H (high dump)
Capacity 600 litres
Type Blowerless center collection high dump with rapid demount feature
Dump system Hydro
Weight 210kg (463 lbs)
Height of lift 1955mm (77)
Height of dump 1930mm (76)
Collector SBC550 X L (low dump)
Capacity 550ltr
Type Blowerless centre collection
Dump system Hydro
Height of dump 890mm (35)
Weight 115kg (254lbs)
ISEKI SXG326+ COMMERCIAL LAWN TRACTOR
Power Engine: Type Vertical, Water-cooled, 4-cycle, diesel
Displacement 1123cc
No of cylinders 3
Power 15.4kW (21hp) at 2600rpm
Fuel capacity 21ltr (4.6 gal)
Transmission Type HST (Hydrostatic transmission)
Brakes Type Dry internal
No. of brakes 1 before diff (homologated version: 2 after diff)
Tyres Front 18 x 8.50-8
Rear 26 x 10.50-12
Dimensions Length 2110 mm (83.1)
Width 1170 mm (46.1)
Overall height 1320 mm (52)
Weight 530kg (1168 lbs)
Mower Deck SCMA 54 No of blades: 2
Centre rear discharge rotary, synchronised blades
Cutting width 1.372m (54)
Cutting height 25mm (1.0) - 115mm (4.5)
Adjustments 7 stages by pin replacement and stepless dial
Weight Deck 96kg (212 lbs), link 9kg (20 lbs)
Collector SBC600 X H (high dump)
Capacity 600 litres
Type Blowerless center collection high dump with rapid demount feature
Dump system Hydro
Weight 185kg (408 lbs)
Height of lift 1970 mm (77.6 in)
Height of dump 1940 mm (76.4 in)
Collector (optional) SBC550 X L (low dump)
Capacity 550 ltr
Type Blowerless centre collection
Dump system Hydro
Height of dump 890 mm (35 in)
Weight of dump 70 kg (154 lbs)
£ 5.00
ASPEN 4 1 LITREAspen 4 is the cleanest petrol that you can use. Aspen is made from Alkylate Petrol which is made from the gases from the top of the distillation tower which is then synthetically modified into a liquid again. The result is a petrol that is totally free from sulphur, benzene and aromatics (solvents). It is chemically inert meaning that you can leave the fuel in the machinery and your lawnmower will start next spring again. An added bonus is that it does not smell, the exhausts does not smell, it will not smoke and you are breathing a much cleaner air when you are mowing your lawn.

More Information can be found by following the below link to the Aspen Website
http://www.aspenfuel.co.uk/products/environmental-fuels/aspen-alkylate-petrol/

£ 5.00
ASPEN 2 1 LITREAspen 2 is a ready-mixed (2%) alkylate petrol for all 2-stroke small capacity engines. It is mixed with a synthetic high quality high performance 2-stroke oil for maximum protection and low smoke. This 2-stroke ready-mixed alkylate petrol contains no sulphur, benzene or aromatics. It is therefore much better from a health aspect to use than regular petrol. In fact normal petrol contains so much benzene and aromatics (read solvents) that it is a real health risk to use in 2-stroke engines. Aspen 2 is also chemically inert so you can comfortably leave the fuel in the machine and it will not gum-up. It will also store for years whereas normal petrol start to go off after 30 days

More Information can be found by following the below link to the Aspen Website
http://www.aspenfuel.co.uk/products/environmental-fuels/aspen-alkylate-petrol/
£ 10.00
ELECTRIC MACHINERY ESTIMATE At FISCO we can fully appreciate that not everyone wants to fully commit initially to having an item repaired or serviced without a ball park figure on cost which is why we offer an estimate service. Once we receive the machine our mechanics will strip the machine down find out the issue and provide yourself with an estimate price for the parts and labour. If you decide to proceed with the repair the £10 charged up front will be deducted from your final bill. As you can appreciate it is only an estimate and the final bill may differ slightly from the estimate provided.
Delivery charges still apply.
£ 20.00
SMALL 2 STROKE AND 4 STROKE MACHINERY ESTIMATEAt FISCO we can fully appreciate that not everyone wants to fully commit initially to having an item repaired or serviced without a ball park figure on cost which is why we offer an estimate service. Once we receive the machine our mechanics will strip the machine down find out the issue and provide yourself with an estimate price for the parts and labour. If you decide to proceed with the repair the £20 charged up front will be deducted from your final bill. As you can appreciate it is only an estimate and the final bill may differ slightly from the estimate provided.
Delivery charges still apply.